Back to blogs

    Reweigh Certificate Helps in Verifying Freight Weight Changes

    By TransportOne Editorial Team•October 23, 2026•7 min read
    Shrink-wrapped pallets of boxed USDA emergency food stacked in a warehouse

    A weight correction lands on a PRO you shipped three weeks ago. The bill of lading said 318 pounds, the carrier says 510, and the invoice is 140 dollars above what your system accrued. A reweigh certificate is the carrier's record of that re-measurement: the terminal, the shift, the device and the figures it produced. Your analyst checks that the carrier rated its own figure correctly, sees that it did, and releases the invoice without ever pulling the certificate.

    It was there the whole time. The carrier's measurement happened at a named terminal, on a dated shift, on an identified device, and all of it was written down at the time. It's sitting behind credentials your team already has.

    Where to find a reweigh certificate

    Carriers don't re-rate freight on a hunch. A reweigh or a redimension produces a record, and the larger carriers publish how to get a reweigh certificate.

    Carrier portals

    XPO's Document Finder help page lists the document types you can retrieve by PRO number. These are the ones a W&I dispute actually runs on:

    • Weights and Corrections
    • Weights and Research Photos
    • Inspection Report
    • NMFC Certificate, which sits in the same list

    The published procedure is short: log in, open Document Finder from the Tools menu, and enter the PRO numbers and the document type.

    Shipping APIs

    Retrieval goes beyond portals. ShipEngine's LTL API documentation lists the documents that can be associated with a PRO number as bill_of_lading, delivery_receipt, invoice, or weight_inspection_certificate. The certificate is enumerated beside the BOL, which tells you how routine it is.

    Most audit teams accept the asymmetry anyway. The correction arrives as a dollar amount on an invoice line, the proof stays one lookup away, and nothing in the approval path forces the lookup. What we see most often is an approval queue where the correction line is checked for arithmetic and the document behind it never gets requested.

    What Should a Valid Reweigh Certificate Include?

    Pull one and read it against the shipment you tendered. Reweigh charges are only as good as the record behind them, and five things decide whether the correction stands up.

    What the invoice line assertsWhat the certificate has to show
    This shipment weighed 510 poundsA PRO and a piece count matching what left your dock, with no handling unit rebuilt at a crossdock
    We measured itA date, a terminal and an identified scale or dimensioner, instead of an unattributed figure keyed into a correction screen
    The measurement is accurateA device model carrying a current Certificate of Conformance
    The variance justifies a re-rateA delta that clears the tolerance written into the carrier's own rules tariff
    The weight is yoursGross and tare kept separate, so the skid, the slip sheet and the cage aren't billed as product

    The device row teams skip

    The third row has real standing behind it. NIST Handbook 44 Section 5.58 governs multiple dimension measuring devices, and its scope is devices used to determine the dimensions or volume of an object for the purpose of calculating freight, storage or postal charges.

    An instrument inside that scope is subject to type evaluation by the National Type Evaluation Program, run under the National Conference on Weights and Measures, which issues the certificate marking a model legal for trade. So the dimensioner billing your freight is a regulated measuring instrument with a certificate number. Asking which one it was is a fair question.

    The tare row

    Gross and tare matter most where packaging is heavy relative to product. Shippers moving palletised cases, the kind of freight discussed under freight audit for food and beverage shippers, should check that the skid and slip sheet weren't rated as goods.

    What Do Freight Tariffs Say About Reweigh Charges?

    Each carrier's rules tariff sets when reweigh charges can apply, including the tolerance a variance has to clear before a re-rate. Those tolerances are published, and they're tighter than most people assume.

    FedEx Freight 100-Y

    FedEx Freight's 100-Y rules tariff provides that where a reweigh comes back less than 50 pounds greater than the weight on the bill of lading, no reweigh fee applies and no change in linehaul charges will occur. At 50 pounds or more it applies a validation fee of 40 dollars, with freight, fuel surcharge and other applicable charges modified accordingly. The same tariff prices weighing on request under Item 990 at 155 dollars per shipment on the carrier's scale, or 419 dollars on a certified public scale.

    AAA Cooper Item 970

    AAA Cooper draws the boundary somewhere else. Its Item 970 applies a weigh fee when the variance exceeds 200 pounds, or is at least 50 pounds and more than 10 percent of the stated weight. The same fee applies, at 25.30 dollars per shipment, when the shipper or consignee asks for a weigh or reweigh.

    The same 60 pounds on both tariffs

    Add 60 pounds to a 1,000 pound shipment. Under FedEx Freight's rule that clears the line and triggers a re-rate. Under AAA Cooper's it fails: 60 pounds is under 200, and six percent isn't over 10 percent. Whether a correction is even allowed to stand depends on the tariff governing that lane, and nobody reads it at approval time.

    Using a reweigh certificate in a dispute: the statutory clocks

    Federal law gives the shipper a document right and gives both sides a deadline.

    The right to the basis of the rate

    Under 49 U.S.C. 13710(a)(1), a motor carrier of property, other than one providing transportation in noncontiguous domestic trade, shall provide to the shipper, on request of the shipper, a written or electronic copy of the rate, classification, rules and practices upon which any rate applicable to its shipment is based. You're entitled to ask for the basis of a re-rate.

    The 180 day windows

    Subsection (a)(3) sets the clocks. A carrier must issue any bill for charges in addition to those originally billed within 180 days of receipt of the original bill in order to have the right to collect them. A shipper must contest the original bill or a subsequent bill within 180 days of receipt to keep the right to contest.

    Balance due invoices from reweighs are exactly the kind of charge that shows up late. On one that appears seven months after the original bill, the first question is whether the right to collect survived the delay.

    A regulator's benchmark

    Oregon's rule for the carriers it regulates, OAR 740-060-0080(4), writes the procedure out. It requires the carrier to reweigh when the shipper asks before the delivery date, to disclose the certified scale, to furnish original or true copies of the weight tickets, and to bill on the lower of the two net scale weights. Interstate LTL doesn't run under that rule. It's still a useful benchmark, because it shows a regulator declining to bill on a figure that was neither documented nor shared.

    How Does Penny Help Audit Freight Reweigh Charges?

    In our automated freight invoice audit, Penny treats a reweigh correction as a document request first and arithmetic second.

    She starts by checking whether the certificate is on file. If it isn't, she retrieves it by PRO where the carrier exposes retrieval, and otherwise drafts the request citing 13710(a)(1) so the line doesn't pass as unverifiable. Silence in response is a finding in itself: a correction the carrier won't evidence is one it'll struggle to defend.

    Next she tests the document against the shipment, using the checks in the table above. Ordinary mistakes inside the carrier's own figures are common, and hardly anyone recomputes them.

    Then she sets the certificate beside your tender record. Where your dock captured a measured weight and dimensions at loading, two contemporaneous records exist and there's a genuine dispute, the position described in defending freight class with recorded dimensions. Where your side holds nothing, she won't manufacture a number. The line comes back marked needs-data with the missing field named, as set out in why an audit agent should flag missing data.

    She also watches both clocks. A late balance due bill gets flagged, and your own contest window doesn't quietly close while a dispute sits in somebody's inbox.

    Start with one question about attachment

    Here's the test. Take 90 days of LTL invoices, isolate every line carrying a weight or inspection correction, and ask whether the certificate is attached to the file. Available in principle doesn't count. The share without one is the share of corrections you paid on the carrier's word alone.

    Pull those missing certificates by PRO and run the five checks. You should expect a mix. Some corrections will be right. Some will measure a unit rebuilt after it left you, some will sit under the tariff's own tolerance, and a few will bill a skid as product.

    If you'd like help working through that pile, book a walkthrough and bring the 90 days. We'll have Penny retrieve the certificates live and separate the corrections you owe from the ones you don't.

    Frequently asked questions

    Why do carriers issue freight reweigh charges?
    A reweigh charge bills you for the difference between the weight on your bill of lading and the weight the carrier measured at its terminal. The carrier's rules tariff is what allows it. FedEx Freight's 100-Y, for example, re-rates the shipment and adds a 40 dollar validation fee when a reweigh comes back 50 pounds or more over the BOL weight, and below that tolerance no charge applies.
    How can shippers dispute an incorrect freight weight adjustment?
    Pull the reweigh certificate by PRO and check the piece count, the device, the split between gross and tare, and whether the variance clears the tariff's tolerance. If the carrier won't provide it, 49 U.S.C. 13710(a)(1) lets you request the rate, classification, rules and practices behind the charge. Contest the bill within 180 days of receipt, and bring your own measured tender record if your dock captured one.
    Why do carriers reweigh freight?
    Carriers reweigh or redimension freight at the terminal to check the weight and dimensions you declared on the bill of lading, using a scale or a dimensioner. A reweigh can also happen on request: FedEx Freight prices weighing on request under Item 990, and AAA Cooper charges a fee when the shipper or consignee asks for one. Either way, the measurement should leave a dated record naming the terminal and the device.
    Where can I find a reweigh certificate for an LTL shipment?
    Most large carriers let you retrieve it by PRO number. XPO's Document Finder, under the Tools menu, lists Weights and Corrections, Weights and Research Photos and Inspection Report as document types. ShipEngine's LTL API also lists weight_inspection_certificate among the documents tied to a PRO.
    What does a reweigh certificate show?
    It should show the PRO and piece count, the date and terminal of the measurement, and the scale or dimensioner used. It should also separate gross and tare weight so packaging isn't billed as product. Check the delta against the tolerance in the carrier's rules tariff.

    See it on your freight

    Stop Overpaying On Freight Invoices

    Penny checks every invoice against your contracts and what the shipment actually did, then disputes what doesn’t hold up. You pay 30% of what she saves you, and nothing if she saves nothing.

    See how Penny works

    Found this useful? Share it with your team.

    Share on LinkedIn